Color Ruby Mod

—————————————————————————————————————————————————

Info:

Weight: ~50g according to klb

Length: ~25/26cm 

Aimed spinning style: Neo Powertricks

Creator: klb

Source: My dms with klb

Trivia: I suggested a name to this mod to klb since he had no name for it, and he liked it so much that he adopted that name. In Jeb, speaking wise his name is pronouced as "Karubi", the name of this mod is reminiscent of it with while including the "Color" part from the pcjr barrels, and the ruby part comes from the color of G2 grips he used.

Parts needed

• x2 Pilot Color Jr 850 (3 Barrels 2 caps) (one of the barrel is for the center piece, but can be subbed by using a grip, reducing the barrels needed to two)
• x4 Pilot G2 (2 black grips, and 2 colored ones) 
• x2 14g Bullet sinkers (fishing weights) from Daiso
• x1 Tsukineko Emboss (barrel) 
• x2 Daiso markers (caps) (can be subbed by Crayola Washable) 

Additional Items

• Cello tape
• Acetone / nail polisher remover (optional)  

Text tutorial

Preparation

1. Cut the extremity of the Crayola caps to ~1.3cm.
2. Cut both Pcjr to 8.5cm from the front side (backplug side will be at the center of the mod)
3. Cut the Emboss barrel to ~3.5cm (the length is unspecified on the legit one)
4. Cut 0.4cm of the Pcjr barrel that will be used as middle piece
5. Empty the inside of the Pcjr cap. (Can be done with wooden scisors or a dremmel) 
6. Of the black G2 grips, cut 4x 2 blocks and 6x 1 stripes.
7. Of the colored G2 grips, cut x2 3 blocks and 6x 1 stripes.
8. Cut the "O-ring" section of the colored G2 grips.

Assembly 

1.  On the Pcjr caps, add in this order: 2 black stripes, 3 colored stripes, 1 black stripe, 1 colored stripe, 1 black stripe, 1 colored stripe, 1 black stripe, and 1 colored stripe.
2.  Put the piece of daiso marker next to the top of the pcjr cap, then add tape to link both. Add more tape exclusively on the daiso marker section (this will make the grip have a more puffy look.)
3. Wrap tape around the fishing weight and push in inside the cap assembly (it will make the cap structure more sturdy)
4. Add a block of two black G2 grip and the flat part of colored G2 grip (this part is the hardest of this mod as the tape under the grip has to not be folded while putting the grip).
5. Add tape on the cutted side of the Pcjr barrels.
6. Assemble the cap on it and cut the excess of tape (if necessary.) 
7. Put the 0.4cm piece of pcjr barrel on the center of the Emboss section.
8. Assemble. 

—————————————————————————————————————————————————

Mod Picture