Info:
Weight: 22.14g
Length: 24.9cm
Aimed spinning style: Tech and Aesthetic
Creator: ProBloodBag
Source: Video below. Pictures from Magiai.
Parts needed
- x3 Acrylic Paint Markers (barrel)
- This pen can be found under other names, while sometimes being shorter. Aim for a 8.5cm body.
- x2 Pilot Opt Shaker (tips and sub-body)
- x2 Tru Red Gripped Ballpoint Stick Pen (cap and grip)
- A Food Grade Silicone Tube
- Right dimension are 9mm ID x 12mm OD. The tube must be at least 6cm long.
Text tutorial
Preparation
- Cut the tip of two Acrylic Markers.
- File the pins inside the front of the two Acrylic Markers.
- Cut 1.5cm from the back of the third Acrylic Marker.
- Remove the clip of the Tru Red cap.
- Cut 2x 3.6cm from the sub-body of the OPT shaker.
- Cut 2x 3cm of the Silicone tube.
- Cut 2x 5mm of Tru Red grip.
Assembly
- Put the Tru Red grip over the OPT tip.
- Put the OPT tip inside the OPT sub-body.
- Add the Silicone tube to stabilise the tips.
- Put the 1.5cm if Marker on the center of the Tru Red cap, then Add tape on both sides.
- Connect the back sides of the barrel on the Tru Red cap, then connect both cap structure on the front sides of Acrylic marker
Image Tutorial
—————————————————————————————————————————————————
Mod Picture
