Info:
Weight: 18.6g
Length: 20cm
Aimed spinning style: Classical Aesthetic
Creator: Menowa*
Source: Penmodding.pm. Picture from Saifon.
Parts needed
- 1x G3 (barrel and plastic tip)
- 1x Jimnie (cap and grip)
- 1x Zebra Airfit LT GEL/Ballpoint (tip)
- 1x Dong-A Anyball (grip)
- 1x Pilot Dr. Grip (grip)
- 1x Namae (Backplug)
- 1x Muji Aluminum Pen (Tip)
- 1x Pentel Color Twin (barrel)
- 1x Pilot G2 (Barrel)
- 1x Pilot G2 (tip)
- 1x Pentel Hybrid Gel Grip (tip)
- 2x Zebra Airfit BA-9 (Metal ring)
Additional Items
- Tape
- An insert (or multiple)
Text tutorial
Preparation
- Cut the clip of the G3 cap and remove the rubber stopper.
- Prepare the G3 barrel, then sand down the front until it's possible to fit an insert under the g2 barrel when connecting.
- Cut 3 blocks of Anyball grip.
- Cut 4.7cm from the front of the G2 barrel.
- Cut 3.2cm from the Jimnie cap.
- Cut the top part of the Namae backplug.
- Cut 0.5 cm of the Dr. Grip grip.
- Cut the big ring, 1 block, 2 blocks and 3 blocks of anyball grip.
- Cut 2.3cm of Ct barrel
Assembly
Front side
- Put the g2 body on the front of the g3 "screw" side first.
- Add the big ring of Anyball grip, an airfit ring, the jimnie cap (Optional: Put an insert underneath), then another airfit ring.
- Stack the tips in this order if you use LT Ballpoint tip: Airfit LT bp tip, and G1 tip. The tip stack with LT Gel is: HGG tip, Airfit LT gel tip, and G1 tip.
- Put the tip stack in the g2 barrel (it should fit snugly)
- Adjust the jimnie cap, then add 3 block of anyball on the front.
Cap side
- Put the Muji aluminum tip inside the g3 cap.
- Put the Namae backplug and the cut section of ct barrel inside the cap (Optional: Wrap an insert around the Ct barrel).
- On the cap add the grips in this order: 1 ring of Anyball, 0.5cm of Dr. Grip grip, and 2 blocks of Anyball grip.
- Add tape on the G3 body then connect it to the G3 cap.
—————————————————————————————————————————————————
Mod Picture
