kUzu G3 (UPSB ver.)

 

Info:

Weight: 20g

Length: 20cm

Aimed spinning style: Classical Aesthetic

Creator: nateiskewl (Original mod by kUzu)

Source: Topic of UPSB V3

Parts needed

• 1x Plastic G3 (Barrel, tip)
• 1x Zebra Hyper Jell (Grip and cap)
• 1x HGG (tip)
• 2x Signo DX (2 tips, 1 grip)
• 2x Pilot Hi-Tec-C (Tips)
• 1x Dong-A Anyball (Grip)
• 1x Uni-ball Knock (Grip)
• 1x 1 cm grip (Zebra Hyper Jell can be used)

Additional Items

• Electric (black) tape
• an insert (optional) (kUzu uses a page from the "Weekly Jump" magazine)

  

  Highligh of the part used for the original insert

Text tutorial

Preparation

1. Remove the backplug, grip and ink from the Plastic G3, then sand down the nubs on the front.
2. Cut 1 cm of a grip (Hyper Jell is recommended).
3. Cut 1 cm of Hyper Jell grip.
4. Do a gripcut on the Knock grip.
5. Cut 3 sections from the Anyball grip.
6. Cut the clip from the Hyper Jell cap.
7. Remove one grip and 2 tips from the Signo DX.
8. Remove the tips from the HGG and Pilot Hi-Tec-C.

Assembly

1. Add 1 cm of Hyper Jell grip on the front of the Plastic G3.
2. Add 1 cm of the other grip next to the Hyper Jell grip.
3. Put the Pilot Hi-Tec-C tip on the Plastic G3, then add a Signo DX tip onto the Pilot Hi-Tec-C tip (add tape / Blu Tack to help the tips stay in place).
4. Cover the 3 tips with the Signo DX grip.
5. Put the Knock grip on the Signo DX grip.
6. Add the 3 sections of Anyball grip in front of the Knock grip.
7. Put one Signo DX tip inside the Hyper Jell cap.
8. Put the HGG tip on the remaining Pilot Hi-Tec-C tip, then put it inside the rest of the Hyper Jell grip.
9. Put the Hyper Jell grip inside the Hyper Jell cap (HGG tip first).
10. Wrap tape on the back of the Plastic G3 body.
11. Add an insert (optional).
12. Assemble the cap on the back of the Plastic G3 body.