Info:
Weight:35-50g (vary from the tips used)
Length: 21-23cm (vary from how long the tips are and how it's gripped)
Aimed spinning style: Classical Powertrick
Creator: Vore-Tex (Adapting the ABM from A13x)
Source: Video below
Parts needed
- 1x Pilot Dr. Grip（Grip）
- 1x Giotto Turbo Maxi (Body)
- 1x big Veleda White Board Marker (cap)
- 1x Pentel Color Twin (Small cap)
- 1x Edding 661 (cap)
- 1x Pilot SuperGrip (Grip)
- 1x Pentel RSVP (Grip)
- 2x Archery bullet tips
Additional Items
- Cello tape and Electrical tape
Text tutorial
Assembly
Preparation
- Cut ~3.3 cm of the Velleda cap.
- Disassemble the Giotto and cut the front until it's ~1cm
- Cut your Dr. Grip grip into 2x 2cm sections.
- Cut your RSVP grip 2 times: 1 to separate the o-ring and another one at 2/3 of the grip (one part is slightly longer than the other).
- Cut 2 sections of SuperGrip grip, 1x 4 stripes and 1x 2 stripes.
Front side
- Put the bullet tips inside the Edding cap (some tape might be necessary).
- Add these grips on the Edding cap following this order: 4 stripes of G2 grip, the smaller section of RSVP grip, and one side of Dr. Grip grip.
- Connect the Edding cap on the Color Twin small cap.
Back side
- Add these grips on the Velleda cap following this order: the longer section of RSVP grip turned inside out, 2 sections of SuperGrip grip, and the last side of Dr. Grip grip.
- Put the bullet tips inside the Velleda cap (tape might be necessary to avoid rattling).
- Add your RSVP o-ring on the front of the Giotto, and add cello tape on the rest of the front.
- Put the Color Twin small cap inside the back of the Giotto barrel.
- Connect the old Velleda cap on the front of the old Giotto barrel.
Video tutorial
Video tutorial by VORE-TEX
